Abstract
To reduce the coupling loss of a fiber-to-ridge waveguide connection, a planar silica spot-size converter for a wavelength of 1.55 \mum is implemented in the form of a nonperiodic segmented waveguide structure with irregular tapering. A simple single-step lithography process is sufficient for the fabrication of the planar structures. An evolutionary algorithm has been successfully applied for the optimization. The simulated results obtained with a three-dimensional (3-D) finite difference beam propagation method (FD-BPM) program are compared with measurements of implemented couplers, showing very good agreement. A waveguide-to-fiber coupling efficiency improvement exceeding 2 dB per converter is shown. Structures obtained with this approach are very short ({\sim}140\;\mum) and simple to integrate on the same wafer with other planar structures such as phased arrays or ring resonator structures.
[IEEE ]
PDF Article
More Like This
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access Optica Member Subscription