Abstract

We report on the design, fabrication, and characterization of temperature insensitive strip silicon-on-insulator racetrack resonators. The influence of various parameters, such as waveguide width, waveguide height, ring radius, coupling length, ring gap, and operating wavelength, on temperature-dependent wavelength shift is examined. A resonant wavelength shift of $0.2\mathrm{pm}/\mathrm{K}$ at a $1550\mathrm{nm}$ wavelength is measured for $335\mathrm{nm}\times 220\mathrm{nm}$ waveguides. A significant reduction of waveguide propagation losses, improved ring Q value, and higher extinction ratio are obtained after overlaying the silicon waveguides with a polymer cladding.

© 2011 Optical Society of America

Athermal Silicon-on-insulator ring resonators by overlaying a polymer cladding on narrowed waveguides

Jie Teng, Pieter Dumon, Wim Bogaerts, Hongbo Zhang, Xigao Jian, Xiuyou Han, Mingshan Zhao, Geert Morthier, and Roel Baets
Opt. Express 17(17) 14627-14633 (2009)

Broadband athermal waveguides and resonators for datacom and telecom applications

Liuqing He, Yuhao Guo, Zhaohong Han, Kazumi Wada, Jurgen Michel, Anuradha M. Agarwal, Lionel C. Kimerling, Guifang Li, and Lin Zhang
Photon. Res. 6(11) 987-990 (2018)

Post-fabrication trimming of athermal silicon waveguides

Stefano Grillanda, Vivek Raghunathan, Vivek Singh, Francesco Morichetti, Jurgen Michel, Lionel Kimerling, Andrea Melloni, and Anu Agarwal
Opt. Lett. 38(24) 5450-5453 (2013)

Athermal silicon nitride ring resonator by photobleaching of Disperse Red 1-doped poly(methyl methacrylate) polymer

Feng Qiu, Feng Yu, Andrew M. Spring, and Shiyoshi Yokoyama
Opt. Lett. 37(19) 4086-4088 (2012)

Athermal operation of Silicon waveguides: spectral, second order and footprint dependencies

Vivek Raghunathan, Winnie N. Ye, Juejun Hu, Tomoyuki Izuhara, Jurgen Michel, and Lionel Kimerling
Opt. Express 18(17) 17631-17639 (2010)