Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Erbium-Ytterbium doped active waveguides at 1.5 µm made by femtosecond micromaching

Not Accessible

Your library or personal account may give you access

Abstract

We demonstrated low-loss (<0.25 dB/cm), gaussian-mode profile single-transverse mode active waveguides at 1.5 µm in Er: Yb-doped glass substrate made by femtosecond micromachining. Net gain has been achieved when used as active element in a standard waveguide-amplifier set-up.

© 2003 Optical Society of America

PDF Article
More Like This
Femtosecond micromachining of symmetric active waveguides by astigmatically shaped beams

G. Cerullo, S. De Silvestri, R. Osellame, S. Taccheo, M. Marangoni, R. Ramponi, and P. Laporta
CWI5 Conference on Lasers and Electro-Optics (CLEO) 2003

Modal Phase Matching in GaAs/AlGaAs Waveguides: Second Harmonic Generation With Femtosecond Pulses Near 1.5 µm

S. Venugopal Rao, K. Moutzouris, M. Ebrahimzadeh, A. De Rossi, M. Calligaro, V. Ortiz, and V. Berger
CTuG1 Conference on Lasers and Electro-Optics (CLEO) 2003

Active Waveguide Fabrication in Erbium Doped Oxyfluoride-Silicate Glass Using Femtosecond Pulses

R.R. Thomson, H.T. Bookey, N. Psaila, S. Campbell, D.T. Reid, A.K. Kar, S. Shen, and A. Jha
CWD5 Conference on Lasers and Electro-Optics (CLEO) 2006

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved