Abstract

Tri-structural isotropic (TRISO) fuel particles are a key component of next generation nuclear fuels. Using x-ray computed tomography (CT) to characterize TRISO particles is challenging because of the strong attenuation of the x-ray beam by the uranium core, leading to severe photon starvation in a substantial fraction of the measurements. Furthermore, the overall acquisition time for a high-resolution CT scan can be very long when using conventional laboratory-based x-ray systems and reconstruction algorithms. Specifically, when analytic methods such as the Feldkamp–Davis–Kress (FDK) algorithm are used for reconstruction, it results in severe streak artifacts and noise in the corresponding 3D volume, which makes subsequent analysis of the particles challenging. In this paper, we develop and apply model-based image reconstruction (MBIR) algorithms to improve the quality of CT reconstructions for TRISO particles to facilitate better characterization. We demonstrate that the proposed MBIR algorithms can significantly suppress artifacts with minimal pre-processing compared to conventional approaches. We also demonstrate that the proposed MBIR approach can obtain high-quality reconstruction compared to the FDK approach even when using a fraction of the typically acquired measurements, thereby enabling dramatically faster measurement times for TRISO particles.

© 2021 Optical Society of America

Multi-pass approach to reduce cone-beam artifacts in a circular orbit cone-beam CT system

Chulhee Han and Jongduk Baek
Opt. Express 27(7) 10108-10126 (2019)

Improving spatial resolution with an edge-enhancement model for low-dose propagation-based X-ray phase-contrast computed tomography

Lin Zhang, Huijuan Zhao, Zhongxing Zhou, Mengyu Jia, Limin Zhang, Jingying Jiang, and Feng Gao
Opt. Express 29(23) 37399-37417 (2021)

StaticCodeCT: single coded aperture tensorial X-ray CT

Angela P. Cuadros, Xu Ma, Carlos M. Restrepo, and Gonzalo R. Arce
Opt. Express 29(13) 20558-20576 (2021)

Nonlinear reconstruction of coded spectral X-ray CT based on material decomposition

Tong Zhang, Shengjie Zhao, Xu Ma, Angela P. Cuadros, Qile Zhao, and Gonzalo R. Arce
Opt. Express 29(13) 19319-19339 (2021)

FleXCT: a flexible X-ray CT scanner with 10 degrees of freedom

Björn De Samber, Jens Renders, Tim Elberfeld, Yves Maris, Jonathan Sanctorum, Nathanaël Six, Zhihua Liang, Jan De Beenhouwer, and Jan Sijbers
Opt. Express 29(3) 3438-3457 (2021)