Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Design and fabrication of a 1-by-4 multimode interference splitter based on InP

Not Accessible

Your library or personal account may give you access

Abstract

A strongly guided InP/InGaAsP multimode interference power splitter is designed and simulated by using 3D FD-BPM method. A 1-by-4 multimode interference power splitter is fabricated in terms of the simulation result. The device has 40nm available bandwidth and 2.6dB pass band flatness around 1550nm. Furthermore, the insertion loss is no higher than 10dB at the designed wavelength 1550nm.

© 2011 Optical Society of America

PDF Article
More Like This
On the Optimum Design for 1×N Multimode Interference Coupler based Beam Splitters

Ami Hosseini, David N. Kwong, Yang Zhang, Yazhao Liu, and Ray T. Chen
JTuB9 Integrated Photonics Research, Silicon and Nanophotonics (IPR) 2010

Design and Fabrication of a InP/InGaAsP Multimode Power Splitter

A. Ferreras, F. Rodríguez, E. Gómez-Salas, J.L. de Miguel, and F. Hernández-Gil
IME4 Integrated Photonics Research (IPR) 1993

A compact SOI polarization beam splitter based on multimode interference coupler

Z. Tu, Y. W. Huang, H. X. Yi, X. J. Wang, Y. P. Li, L. Li, and W. W. Hu
830707 Asia Communications and Photonics Conference and Exhibition (ACP) 2011

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved