Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

First-order performance evaluation of adaptive optics systems for turbulence compensation in extended field-of-view astronomical telescopes

Not Accessible

Your library or personal account may give you access

Abstract

A general approach is presented for evaluating and optimizing the degree of atmospheric turbulence compensation achieved by an adaptive optics system employed as part of a extended field-of-view astronomical telescope. This method applies to an adaptive optics system incorporating either one or multiple natural and/or laser guide stars sensed by wave-front slope sensors, a wave-front reconstruction algorithm equivalent to a matrix multiply, a servo control law to temporally filter the output of the wave-front reconstructor, and one or several deformable mirrors optically conjugate to different ranges along the telescope’s line-of-sight. The degree of atmospheric turbulence compensation achieved by such a configuration is evaluated in terms of the residual mean-square phase distortion and turbulence-induced optical transfer function at each point in the telescope’s field-of-view. This evaluation accounts for the combined, interacting effects of the atmospheric turbulence Cn2(h) profile and wind velocity profile, wave-front sensor and deformable mirror fitting error, wave-front sensor noise, finite control system bandwidth, and the net anisoplanatism associated with a given constellation of natural and/or laser guide stars. Optimal wave-front reconstruction algorithms are derived which minimize the telescope’s field-of-view-averaged residual mean-square phase distortion. These evaluation and optimization results are first-order in the sense that they neglect diffraction effects and assume that all adaptive optics components are strictly linear. Results for the case of a finite servo bandwidth also require the wave-front reconstruction algorithm coefficients to satisfy a set of linear constraints; the reconstructor must precisely predict the deformable mirror actuator command vector in the absense of sensor noise and atmospheric turbulence. Numerical results are presented for a variety of adaptive optics configurations incorporating either a single guide star, multiple guide stars and a single deformable mirror, or multiple guide stars and two deformable mirrors.

© 1992 Optical Society of America

PDF Article
More Like This
Sodium Guide Star Adaptive Optics System for Astronomical Imaging in the Visible and Near-Infrared*

D. T. Gavel, J. R. Morris, and R. G. Vernon
AFA3 Adaptive Optics for Large Telescopes (AOLT) 1992

Evaluation of a Concept for Widening the Useful Field-of-View of an Adaptive Optics System

David L. Fried
AMA2 Adaptive Optics for Large Telescopes (AOLT) 1992

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.