Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Fiber based modulator systems at 1053 nm for shaped long pulse on LULI2000 facility

Not Accessible

Your library or personal account may give you access

Abstract

We present a new ns fiber-based front-end for upgrading the LULI2000 facility. This synthesized fiber front-end using an Arbitrary Waveform Generator for programmable pulse generation is capable of producing shaped long pulse from 100 ps to 20 ns at the µJ level and then amplified at an energy of 200 mJ at 10 Hz with fast rise time, very low jitter and good stability thanks to the all diode pumping Nd:YLF pre-amplifiers. This front end is ready for SBS suppression in large scale optics in Nd:Glass facilitie and 2D smoothing by spectral dispersion (SSD). This front-end is a good candidate to seed Nd:Glass laser facilities or to design stable shaped pulsed lasers for OPCPA pumping.

© 2013 Optical Society of America

PDF Article
More Like This
Fiber based modulator systems at 1053 nm for ‘shaped long pulse on LULI2000

L. Meignien, J. P. Zou, E. Bambrink, and P. Audebert
CA_P_24 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2013

Diode Pumped Nd:Glass Rods for LULI2000 100 J Sub 1 ps CPA System

L. Meignien, P-A Chevreuil, and J. Doster
ATh2A.25 Advanced Solid State Lasers (ASSL) 2018

Highly Stable, Long-Pulse, Diode-Pumped Nd:YLF Regenerative Amplifier

A. V. Okishev, L. D. Lund, J. D. Zuegel, and F. DeWitt
LMF3 Laser Science (LS) 2006

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved