Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Development of a kW-level Picosecond Light Source Using Two-Stage Thin-Disk Regenerative Amplifier

Not Accessible

Your library or personal account may give you access

Abstract

We report on a 100-kHz, 5-mJ picosecond system based on a two-stage thin-disk regenerative amplifier. With a compact ring cavity, we obtained 565 W with 46.7% optical-to-optical efficiency in continuous-wave operation without any sign of roll-over.

© 2015 Optical Society of America

PDF Article
More Like This
Development of a variable repetition rate, kW-level, picosecond ring regenerative amplifier

J. Mužík, M. Smrž, M. Chyla, V. Kubeček, A. Endo, and T. Mocek
CA_9_4 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2017

100 mJ thin disk regenerative amplifier at 1 kHz as a pump for picosecond OPCPA

Jakub Novak, Pavel Bakule, Jonathan T. Green, Zbynek Hubka, and Bedrich Rus
STu4O.4 CLEO: Science and Innovations (CLEO:S&I) 2015

Picosecond Thin-Disk Regenerative Amplifier with High Average Power for Pumping Optical Parametric Amplifiers

Catherine Yuriko Teisset, Marcel Schultze, Robert Bessing, Matthias Häfner, Jens Rauschenberger, Dirk Sutter, and Thomas Metzger
CTh5C.6 CLEO: Science and Innovations (CLEO:S&I) 2013

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.