Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Conference on Lasers and Electro-Optics
  • OSA Technical Digest (Optica Publishing Group, 2000),
  • paper PD17

High-Q silicon-based microring resonators fabricated using 248 nm optical lithography

Not Accessible

Your library or personal account may give you access

Abstract

Microphotonic components, such as microring wavelength division multiplexers (WDM), will play a key role in the penetration of the all-optical network closer to the end consumer of high-bandwidth services.

© 2000 Optical Society of America

PDF Article
More Like This
Cascadability improvement of a cross-gain modulation wavelength converter using a grating based optical add/drop multiplexer

Xueyan Zheng and Fenghai Liu
TuF4 Optical Fiber Communication Conference (OFC) 2000

Low polarization-dependent-loss silicon photonic trident edge coupler fabricated by 248 nm optical lithography

Xin Tu, Patrick Dumais, Ming Li, Dominic Goodwill, Hongyan Fu, Dongyu Geng, and Eric Bernier
AS4B.3 Asia Communications and Photonics Conference (ACP) 2015

Fabrication of High Q Microdisk Resonators using Thermal Nanoimprint Lithography

P. Schiavone, N. Chaix, Q. Li, A. Eftekhar, S. Yegnanarayanan, and A. Adibi
CMI7 Conference on Lasers and Electro-Optics (CLEO:S&I) 2010

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved