Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Conference on Lasers and Electro-Optics
  • OSA Technical Digest (Optica Publishing Group, 2001),
  • paper CMR2

Diffractive lens fabrication by replica molding

Not Accessible

Your library or personal account may give you access

Abstract

The fabrication of diffractive optical elements (DOE’s) using a combination of electron-beam lithography and replica molding is detailed. Previous work has shown that diffractive optical lenses can be successfully fabricated with subwavelength features.1–2 The challenge now is to fabricate a diversity of complex diffractive optical elements,3 and to develop replica molding as a technique for their rapid and effective production.

© 2001 Optical Society of America

PDF Article
More Like This
Large area multi-material plasmonic nanostructures fabricated by replica molding and mechanical sectioning

Mikhail A. Kats, Darren J. Lipomi, Philseok Kim, Sung H. Kang, Joanna Aizenberg, George M. Whitesides, and Federico Capasso
CPDA5 Conference on Lasers and Electro-Optics (CLEO:S&I) 2010

Fabrication of aspherical glass molded lens using vitreous carbon mold

Xun Lu, Young-Kyu Kim, and Seok-min Kim
STh4K.4 CLEO: Science and Innovations (CLEO:S&I) 2016

On-demand lens fabrication by liquid phase molding with gallium and Polydimethylsiloxane

Keisuke Nakakubo, Hiroaki Nomada, Hiroaki Yoshioka, Kinichi Morita, and Yuji Oki
STh1I.7 CLEO: Science and Innovations (CLEO:S&I) 2018

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved