Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2013 Conference on Lasers and Electro-Optics Pacific Rim
  • (Optica Publishing Group, 2013),
  • paper WPE_9

Development of Femtosecond Laser Processed FBG Sensors for High Temperature Piping System

Not Accessible

Your library or personal account may give you access

Abstract

Fiber Bragg grating was made by ultrashort laser processing. Carbon silicate fabric was used to reinforce the FBG sensor. Ceramic adhesive was applied to bond it on the piping material. Loading test was done ranging from 400 to 600 °C. The FBG sensors were prepared for the structural health monitoring of high temperature complex piping system.

© 2013 IEICE

PDF Article
More Like This
High Temperature Performance of Femtosecond Laser Written FBGs

Robin Elliott, Timothy Lee, Martynas Beresna, Morten Ibsen, and Gilberto Brambilla
ch_p_13 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2023

An FBG Sensor for Strain and Temperature Discrimination at Cryogenic Regime

D. Sengupta, M. Sai Shankar, P. Kishore, P. Saidi Reddy, R. L. N Sai Prasad, P. Vengal Rao, and K. Srimannarayana
831106 Asia Communications and Photonics Conference and Exhibition (ACP) 2011

FBG moisture sensor system using SOA-based fiber laser with temperature compensation

Liyin Han, Lutang Wang, Nian Fang, Huishan Cui, and Zhaoming Huang
831129 Asia Communications and Photonics Conference and Exhibition (ACP) 2011

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved