Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • CLEO/Europe and EQEC 2009 Conference Digest
  • (Optica Publishing Group, 2009),
  • paper CB_P33

Limitations to Peak Continuous Wave Power in High Power Broad Area Single Emitter 980 nm Diode Lasers

Not Accessible

Your library or personal account may give you access

Abstract

980nm broad area diode lasers with stripe widths in the 90-100 μm range are commercially important as pumps for fiber lasers, as well as for direct applications [1]. Recent work on 910-990nm sources has shown that peak continuous wave (CW) powers in the 20-25W range are achievable in such structures [2,3] and reliable operation for > 4000 hours was reported at 20W [4]. Further improvements in peak reliable power and beam quality of diode laser sources are required to enable greater brightness from the overall laser system.

© 2009 IEEE

PDF Article
More Like This
Peak power from 60-μm Broad Area Single Emitter Limited to 50-W by Carrier Escape

A. Pietrzak, P. Crump, R. Staske, H. Wenzel, G. Erbert, and G. Tränkle
CMN2 Conference on Lasers and Electro-Optics (CLEO:S&I) 2008

Efficiency-optimized 973nm high power broad area DFB lasers with overgrown aluminium-free gratings for peak power conversion of 63%

C.M. Schultz, P. Crump, H. Wenzel, S. Knigge, O. Brox, A. Maaßdorf, F. Bugge, and G. Erbert
CB7_3 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2011

Efficient And Simple High-Power Femtosecond Yb:KGW Slab-Laser Pumped By A Single Broad-Area Emitter Diode

F. Hoos, T.P. Meyrath, S. Li, B. Braun, and H. Giessen
MB13 Advanced Solid-State Photonics (ASSL) 2009

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved