Abstract

The rapidly rising technology of optical parametric chirped pulse amplification (OPCPA) [1] offers unique advantages, among others, such as high broadband gain, including frequency ranges inaccessible to direct laser amplification, and efficient energy conversion using narrowband picosecond pump pulses. The perennial problems of OPCPA, significantly slowing down its development into a mainstream amplifier technology, are pump–seed pulse synchronization and generation of a frequency-detuned compressible broadband seed pulse for the optical parametric amplifier (OPA). Demonstrated approaches to the synchronization of pump pulse sources include active locking of two master oscillators [2], nonlinear frequency shifting in a photonics crystal fiber (PCF) [3] and simultaneous seeding of the pump pulse laser and the OPA from an ultrabroadband Ti:sapphire oscillator [4]. IR OP(CP)A systems with passive carrier envelope phase (CEP) stabilization were realized using a broadband difference-frequency-generation (DFG) seed produced via spectral broadening of the output of full-fledged Ti:sapphire [5,6] and Yb [7] CPA systems. In this contribution we demonstrate a drastically simplified seeding/synchronization approach based on an environmentally stable μJ-energy 200-fs 100-kHz Yb-doped fiber amplifier (YDFA) that generates a white light continuum in bulk sapphire, pumps a DFG OPA and provides an optical seed compatible with most Nd and Yb ~1-μm pump pulse amplifiers (Fig. 1).

© 2009 IEEE