Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2015 European Conference on Lasers and Electro-Optics - European Quantum Electronics Conference
  • (Optica Publishing Group, 2015),
  • paper CJ_P_13

All-fiber single-mode laser at 977 nm with 5.5 W output power

Not Accessible

Your library or personal account may give you access

Abstract

There are many applications, such as high peak-power core-pumped Yb-doped or Er-doped fiber amplifiers, that requires single-mode high average power pump near 976 nm. Commercially available semiconductor single-mode diodes (pigtailed with single-mode fiber) operated at this wavelength have output power below 1 W, which strongly limits possible application of such devices. Solution of this problem is utilization of Yb-doped fiber lasers operating at 976 nm [1, 2]. However such lasers utilize microstructured active fibers that do not allow creation of all-fiber laser schemes.

© 2015 IEEE

PDF Article
More Like This
Single mode fiber laser emitting 94 W at 977 nm

Johan Boullet, Yoann Zaouter, Rudy Desmarchelier, Matthieu Cazaux, François Salin, and Eric Cormier
TuA3 Advanced Solid-State Photonics (ASSL) 2009

Single-mode Yb-free Er-doped all-fiber laser cladding-pumped at 976 nm with record efficiency of 40 % and output power of 75 W

L. Kotov, M. Likhachev, M. Bubnov, O. Medvedkov, M. Yashkov, A. Guryanov, S. Fevrier, J. Lhermite, and E. Cormier
CJ_8_2 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2013

Development of a cascaded Raman fiber laser with 6.5 W output power at 1480 nm supported by detailed numerical simulations

Michael Steinke, Emil Schreiber, Dietmar Kracht, Jörg Neumann, and Peter Weßels
CJ_P_16 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2013

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved