Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2017 European Conference on Lasers and Electro-Optics and European Quantum Electronics Conference
  • (Optica Publishing Group, 2017),
  • paper CC_3_2

Terahertz quantum Cascade Lasers Frequency combs: Wide bandwidth operation and dual-comb on a chip

Not Accessible

Your library or personal account may give you access

Abstract

Terahertz (THz) quantum-cascade lasers (QCLs) constitute a very promising candidate for compact, wide bandwidth, integrated frequency combs [1,4-7]. QCLs based on heterogeneous cores display the widest spectral coverage reaching more than one octave [2]. The possibility to engineer the gain profile turns out to be fundamental also with respect to dispersion compensation in order to extended the comb spectral bandwidth [2,7]. In the effort of extending the comb operation to a full-octave to implement the laser self-referencing [3], we present here a new here a new THz QCL active region that allows the generation of a frequency comb with a spectral bandwidth exceeding of 1 THz centered at 3.1 THz. It fully exploits the capability of QCLs to integrate different active region designs within one laser cavity. The used building block is the three-active region design reported in Ref. [2], where a design at 3.4 THz has been added to increase the bandwidth towards higher frequencies. The four designs have central frequencies of 2.3, 2.6, 2.9, and 3.4 THz, the number of periods per design has also been rearranged in order to provide a flat gain resulting in a similar threshold for all the active regions and more dynamic range. Additionally, the doping level has been increased. Laser performance results in a largely extended dynamic range with respect to the original three-stack structure. Peak powers above 8 mW are recorded at 30 K and the lasing spectrum spans over 1.94 THz from 1.88 THz to 3.82 THz covering more than a full octave in frequency (Fig.1(a,b)). Dry-etched lasers with side-absorbers for lateral mode suppression similar as in [5] were fabricated for continuous wave (CW) operation and comb operation is probed through the beatnote analysis. Fig. 1(c,d) shows the beatnote as a function of the injected current with a maximum comb span of 1.1 THz which is the broadest demonstrated so far. Further proof of comb regime comes from the simultaneous measurements of two laser ridges on the same chip that show multiheterodyne spectra working in a dual-comb configuration [6].

© 2017 IEEE

PDF Article
More Like This
On Frequency Comb Formation in Terahertz Quantum Cascade Lasers

Petar Tzenov and Christian Jirauschek
CC_3_5 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2017

Octave-Spaced, Dual-Frequency Comb Quantum Cascade Laser Source in a Single Monolithic Waveguide

Andres Forrer, Markus Rösch, Mattias Beck, Jérôme Faist, and Giacomo Scalari
ITh4H.6 Integrated Photonics Research, Silicon and Nanophotonics (IPR) 2018

Full Dispersion Compensation of Terahertz Quantum Cascade Laser Frequency Combs

Yang Yang, David Burghoff, John Reno, and Qing Hu
STh4O.4 CLEO: Science and Innovations (CLEO:S&I) 2017

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.