Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2017 European Conference on Lasers and Electro-Optics and European Quantum Electronics Conference
  • (Optica Publishing Group, 2017),
  • paper CJ_9_2

Thermally insensitive 700W Yb-doped fiber oscillator at 1018nm

Not Accessible

Your library or personal account may give you access

Abstract

Ytterbium-doped fiber lasers (YDFLs) operating at 1018nm have attracted much interest in recent years due to its application as a high brightness, low quantum defect pump source for multi-kilowatt fiber lasers. In addition to the main challenge of suppressing amplified spontaneous emission (ASE) occurring around 1030nm-1040nm as reported by various groups [1, 2], we find that accounting for the thermal sensitivity in the 1018nm laser design is also critical to power scaling.

© 2017 IEEE

PDF Article
More Like This
Experimental and theoretical study of single-mode 1018 nm ytterbium-doped fiber laser with 100 W output power

Jian-Hung Lin, Wei-Ting Lin, Chiang-Hsin Lin, Wei-Lin Chen, Wen-Cheng Huang, and Po-Tse Tai
LTh3F.6 Laser Science (LS) 2017

400W Ytterbium-doped fiber oscillator at 1018nm

C. P. Seah, T. Y. Ng, and S. L. Chua
ATu2A.33 Advanced Solid State Lasers (ASSL) 2015

High power specially-designed fiber laser operating at 1018 nm using 20/400 μm ytterbium-doped fibers

Majid Lafouti, Hamid Latifi, Hossein Fathi, Saeid Ebrahimzadeh, Saeed Sarikhani, Hassan Sarabi, Vahid Vatani, and Seyed Hassan nabavi
cj_p_18 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2019

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved