Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference
  • OSA Technical Digest (Optica Publishing Group, 2019),
  • paper cj_p_18

High power specially-designed fiber laser operating at 1018 nm using 20/400 μm ytterbium-doped fibers

Not Accessible

Your library or personal account may give you access

Abstract

In recent years, ytterbium-doped fiber lasers operating at around 1018 nm have attracted considerable interest for their capability to be used as the pump source in multi-kilowatt fiber lasers [1–3]. There are several challenges to realize the high power 1018 nm fiber laser, the most prominent is suppressing the amplified spontaneous emission (ASE) at the range of 1030-1060 nm. In this paper, we report our experimental results of a high power specially-designed amplifier (SDA) at 1018 nm by employing a low core/cladding diameter ratio active fiber of 20/400 µm.

© 2019 IEEE

PDF Article
More Like This
Thermally insensitive 700W Yb-doped fiber oscillator at 1018nm

W. Y. W. Lim, C. P. Seah, and S. L. Chua
CJ_9_2 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2017

400W Ytterbium-doped fiber oscillator at 1018nm

C. P. Seah, T. Y. Ng, and S. L. Chua
ATu2A.33 Advanced Solid State Lasers (ASSL) 2015

915 nm Pumped 1018 nm Yb-Doped All-Fiber High Power Fiber Laser System

Yakup Midilli, O. Benjamin Efunbajo, Bartu Şimşek, and Bülend Ortaç
cj_p_30 The European Conference on Lasers and Electro-Optics (CLEO_Europe) 2019

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved