Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Femtosecond refractive eye surgery: study of laser parameters for even more efficiency and safety

Not Accessible

Your library or personal account may give you access

Abstract

Studies on corneal surgery and flap processing on enucleated porcine eyes have been performed using a dedicated 100 kHz femtosecond laser source based on Ytterbium technology. IR (1035 nm) and green (517 nm) flap processing have been studied. Comparisons for ocular femtosecond laser surgery are discussed in terms of process efficiency and safety aspects. Flaps with a typical diameter of 6 mm and 150 μm thick have been performed in less than 2 min with both wavelengths. The transmittances of femtosecond laser pulses through the ocular media of porcine eyes have been measured for a collimated beam and during flap processing. More than 25 % of energy is transmitted through the whole eye at the retina during IR pulses flap processing. Concerning green pulses, if less energy is necessary to perform the flap which is of prime interest, the transmission of green light is very high and could be an undeniable obstacle for the safety.

© 2007 SPIE

PDF Article
More Like This
Determining the accuracy of an eye-tracking system for laser refractive surgery

Natalie M. Taylor, Robert H. Eikelboom, Paul P. van Saarloos, and Philip G. Reid
SuB1 Vision Science and its Applications (VSIA) 2000

Microscopic Evaluation of Femtosecond Laser Intrastromal Surgery

M. Han, L. Zickler, M. Walter, G. Giese, F. Loesel, and J.F. Bille
5142_127 European Conference on Biomedical Optics (ECBO) 2003

Femtosecond laser-induced cavitations in the lens of the human eye

Line Kessel, Jose Nymand, Michael Harbst, Mike van der Poel, Lars Eskildsen, and Michael Larsen
6632_33 European Conference on Biomedical Optics (ECBO) 2007

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.