Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • European Conferences on Biomedical Optics 2021 (ECBO)
  • OSA Technical Digest (Optica Publishing Group, 2021),
  • paper ETu2A.11

3D-printed Collection Channel of Raman Probe Designed Using Modular Approach

Not Accessible

Your library or personal account may give you access

Abstract

This work is devoted to the development and manufacture of the collection channel for the Raman probe using 3D printing technologies. Possibilities of FFF and SLA technologies were investigated for the manufacture of optical elements holders and alignment relative to each other. The design provides for a modular approach allowing for replacing one element with another or installation additional optical elements. The Raman spectrum of aspirin was recorded by the developed probe and the results were compared with the commercial StellarNet Raman probe.

© 2021 The Author(s)

PDF Article
More Like This
Modular 3D-Printed Plasmonic Circuits for Signal Processing in THz Communications

Yang Cao, Kathirvel Nallappan, Hichem Guerboukha, Guofu Xu, and Maksim Skorobogatiy
STh2F.3 CLEO: Science and Innovations (CLEO:S&I) 2021

A modular and open source prototyping platform for optical sensors based on a 3D printed honeycomb breadboard

Yannic Toschke, Bjoern Bourdon, Dirk Berben, and Mirco Imlau
JW2A.7 Applied Industrial Spectroscopy (AIS) 2021

Poster Presentation

Media 1: PDF (10151 KB)     
Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved