Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • 2019 Conference on Lasers and Electro-Optics Europe and European Quantum Electronics Conference
  • OSA Technical Digest (Optica Publishing Group, 2019),
  • paper ed_1_2

A 1880 km Long Interferometric Optical Fibre Link PTB–MPQ–PTB for Chronometric Levelling with a Transportable Optical Clock

Not Accessible

Your library or personal account may give you access


Chronometric levelling [1-3] is a technique of deriving gravitational potential differences from clock frequency comparisons allowing the determination of height differences. Interferometric optical fibre links (IFL) [4] enable chronometric levelling between distant labs housing optical clocks [5]. An IFL is a phase stabilized telecom fibre link connection establishing a fixed optical phase relationship between two locations up to ~1000 km apart [6]. To perform a chronometric levelling campaign between the stationary optical clocks of the Physikalisch-Technische Bundesanstalt (PTB) and PTB’s transportable Strontium clock [7] placed at the Max Planck Institute of Quantum Optics (MPQ) we have established a new 940 km long IFL between the two locations. At both link ends the frequencies of the clock lasers are compared to the 1,5 μm link transfer laser via fs-combs. To enable chronometric levelling experiments at the level of 10 cm height resolution, we aim a fractional frequency uncertainty of the frequency transfer of < 1×10−18 for averaging times of ~40 ks. To monitor the frequency transfer over the complete 940 km long fibre link the signal is sent back from the receiving end to the sender on a second fibre, which allows an out-of-loop characterization using data of the 1880 km loop. We study two different link setups, cf. Fig. 1a: i) a single-span loop configuration with the option to tap off the signal at MPQ with a passive frequency extraction unit [8]. This setup requires monitoring at the sending end only and allows us to investigate an ultralong IFL, even longer than the previous record [9]. And ii) an antiparallel configuration of two concatenated, individually stabilized interferometric fibre links. This setup offers lower instabilities due to a decreased delay-limit [10] but requires setting up and maintaining a stabilization system at both link ends. To compensate the attenuation of the fibres we used fibre Brillouin amplifier modules (FBAM) developed inhouse providing a typical gain of > 40 dB.

© 2019 IEEE

PDF Article
More Like This
A 500 km optical fiber link with six remotely controlled optical amplifiers for frequency comparison between MPQ and PTB

Katharina Predehl, Janis Alnis, Thomas Udem, Theodor Hänsch, Ronald Holzwarth, Osama Terra, and Harald Schnatz
CTuDD1 Conference on Lasers and Electro-Optics (CLEO) 2010

Ultra Precise Frequency Dissemination across Germany – Towards a 900 km Optical Fiber Link from PTB to MPQ

Katharina Predehl, Ronald Holzwarth, Thomas Udem, Theodor Hänsch, Osama Terra, Gesine Grosche, Burghard Lipphardt, and Harald Schnatz
CTuS2 Conference on Lasers and Electro-Optics (CLEO) 2009

Optical Frequency Transfer via 920 km Fiber Link with 10−19 Relative Accuracy

S. Droste, K. Predehl, J. Alnis, T. W. Hänsch, Th. Udem, R. Holzwarth, S. M. F. Raupach, O. Terra, Th. Legero, H. Schnatz, and G. Grosche
CTh4A.1 CLEO: Science and Innovations (CLEO_SI) 2012


You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
Login to access Optica Member Subscription

Select as filters

Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved