Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • ETOP 2017 Proceedings
  • (Optica Publishing Group, 2017),
  • paper 1045263

Cultivation Mode Research of Practical Application Talents for Optical Engineering Major

Not Accessible

Your library or personal account may give you access

Abstract

The requirements on science and technology graduates are more and higher with modern science progress and society market economy development. Because optical engineering major is with very long practicality, practice should be paid more attention from analysis of optical engineering major and students’ foundation. To play role of practice to a large amount, the practice need be systemic and correlation. It should be combination of foundation and profundity. Modern foundation professional knowledge is studied with traditional optical concept and technology at the same time. Systemic regularity and correlation should be embodied in the contents. Start from basic geometrical optics concept, the optical parameter of optical instrument is analyzed, the optical module is built and ray tracing is completed during geometrical optics practice. With foundation of primary aberration calculation, the optical system is further designed and evaluated during optical design practice course. With the optical model and given instrument functions and requirements, the optical-mechanism is matched. The accuracy is calculated, analyzed and distributed in every motion segment. And the mechanism should guarantee the alignment and adjustment. The optical mechanism is designed during the instrument and element design practice. When the optical and mechanism drawings are completed, the system is ready to be fabricated. Students can complete grinding, polishing and coating process by themselves through optical fabricating practice. With the optical and mechanical elements, the system can be assembled and aligned during the thesis practice. With a set of correlated and logical practices, the students can acquire the whole process knowledge about optical instrument. All details are contained in every practice process. These practical experiences provide students working ability. They do not need much adaption anymore when they go to work after graduation. It is favorable to both student talents and employer.

© 2017 OSA, SPIE, ICO, IEEE

PDF Article
More Like This
Exploration on the Training Mode of Application-oriented Talents Majoring in Optoelectronic Information

Hao Lv, Aimei Liu, Shengyi Zhang, and Yongjun Xiao
104524I Education and Training in Optics and Photonics (ETOP) 2017

Study on diversified cultivation orientation and pattern of opto-electronic major undergraduates

Zhiying Liu
104523W Education and Training in Optics and Photonics (ETOP) 2017

Study on the feasibility of classified cultivation for master majoring in precision optical engineering

Feng Shi, Ci Song, Ye Tian, Guipeng Tie, Junfeng Liu, and Hang Xiao
11143_67 Education and Training in Optics and Photonics (ETOP) 2019

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved