Abstract
The instruments used to interferometrically measure the optical surfaces of the 6.5-m f/1.25 primary mirrors for the MMT conversion and the Magellan telescope projects must compensate over 800 pm surface departure from the best fitting sphere. The errors in the optical test must not contribute more than 0.04 arc seconds FWHM to the final image and the conic constant must be held to 0.01%. This paper presents an overview of the instruments that were built to measure these giant mirrors to such high accuracy.
© 1999 Optical Society of America
PDF ArticleMore Like This
J. H. Burge, D. Murgiuc, and S. C. West
OFD.2 Optical Fabrication and Testing (OF&T) 1996
James H. Burge
ThA6 Optical Fabrication and Testing (OF&T) 1992
H. M. Martin, R. G. Allen, J. H. Burge, L. R. Dettmann, D. A. Ketelsen, W. C. Kittrell, S. M. Miller, and S. C. West
FT6 Fabrication and Testing of Aspheres (FTA) 1999