Add to BibSonomyAbstract
Rapid manufacturing of silica glass microlens arrays is demonstrated using a novel glass 3D printing technology. A 5×5 array was printed and subsequent characterization showed dense microlenses with uniform focal lengths and good imaging performance.
© 2021 The Author(s)
PDF Article | Presentation VideoMore Like This
Fabrication and optimization of microlens arrays on soda-lime glass materials using a Ti:sapphire laser and sol-gel coating
Daniel Nieto, Ana Isabel Gómez-Varela, and María Teresa Flores-Arias
CM_P_12 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2015
Entirely 3D Printed Spectrometer: Application of Consumer-grade Printing Technologies for Fabrication of Optical and Opto-mechanical Components
Gregory Berglund and Tomasz Tkaczyk
FM3C.6 Frontiers in Optics (FiO) 2021
Laser based 3D printing of fused silica glass
Michael Fokine, Taras Oriekhov, and Chunxin Liu
ce_11_1 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2023