Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

System Identification Using Embedded Dynamic Signal Analyzer

Not Accessible

Your library or personal account may give you access


Parametric descriptions of the actuator model are obtained in a technical specification written by manufactures of an optical pick-up unit. Most of the mechanical and electrical parts have tolerance for error. And various reflectivity and physical characteristics of a disc make an optical system more separate from the nominal system. So the nominal model using the parametric descriptions has a mismatch with an actual system about 30 ~ 50%. To overcome these obstacles against stability and performance, automatic gain-adjustment for a servo loop has been operated in an optical disc drive (ODD). This adjusting algorithm can change the gain of the compensator in order to maximize a phase margin of the servo loop.

© 2011 Optical Society of America

PDF Article
More Like This
Identification of vibration signal in Φ-OTDR system

Chenda Liu, Zujun Qin, Xianming Xiong, and Wentao Zhang
M4A.146 Asia Communications and Photonics Conference (ACPC) 2019

Dynamic Tilt Control of SIL with 4-axis Actuator in NFR System

Kyung-Taek Lee, Sam-Nyol Hong, Jae-Eun Kim, Cheol-Kyu Kim, Jeong-Kyo Seo, Eui-Seok Ko, In-Ho Choi, and Byung-Hoon Min
WA7 Optical Data Storage (ODS) 2007

Optical Automatic Gain Controller for High-Bandwidth Free-Space Optical Communication Links

J. C. Juarez, J. E. Sluz, and D. W. Young
LMA3 Applications of Lasers for Sensing and Free Space Communications (LSC) 2011


You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
Login to access Optica Member Subscription

Select as filters

Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved