Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Measurement of fluorescence of formaldehyde in atmospheric pressure flame

Not Accessible

Your library or personal account may give you access

Abstract

Formaldehyde (H2CO) is one of the key intermediate species in the initial state of combustion and is also a harmful exhaust constituent, especially in alcohol combustion. A detailed understanding of the reaction system of H2CO can be obtained by comparison between measured and calculated density profiles. LIF is often used for in-situ measurement of flame but the estimation of quenching effects under atmospheric pressure is difficult (1). The electronic band spectrum of H2CO has been discussed in many papers (1,2), but most spectral experiments were performed under low pressure at room temperature. Also the red shaded branch of 350nm band which is important for the YAG THG has been seldom used for measurement.

© 1998 Optical Society of America

PDF Article
More Like This
Fast diagnostics of ignition processes by excimer laser induced fluorescence of formaldehyde

D. Grebner, D. Müller, and W. Triebel
CFJ4 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 1998

Picosecond laser-induced fluorescence in atmospheric pressure flames

R. SCHWARZWALD, P. MONKHOUSE, and J. WOLFRUM
THM26 Conference on Lasers and Electro-Optics (CLEO:S&I) 1988

Atmospheric pressure laser induced fluorescence measurements of CH in flames using B2 Σ− levels near predissociation

Robert J. H. Klein-Douwel, Jorge Luque, Jay B. Jeffries, Gregory P. Smith, and David R. Crosley
SuB1 Laser Applications to Chemical and Environmental Analysis (LACSEA) 2000

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.