Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
Conferences > NFOEC > 2012 > JW2A > JW2A.23

Performance Comparison between 980 and 1480 nm Pumping for Er3+-doped Bismuth Fiber Amplifiers

Minwan Jung, You Min Chang, and Ju Han Lee

Not Accessible

Your library or personal account may give you access

Abstract

We have carried out the performance comparison between 980 and 1480-nm pumping for bismuth-based EDFAs. 980-nm pumping was observed to provide no NF benefit relative to 1480-nm due to the overall population decrease in the 4I13/2 state caused by the combination of the pump ESA and the PIQ. 1480 nm was found to be the better considering the signal gain and NF.

© 2012 Optical Society of America

PDF Article
More Like This
Paired-Induced Quenching in Bismuth Oxide-based Erbium-doped Fiber Amplifier

Minwan Jung, You Min Chang, and Ju Han Lee
C342 Conference on Lasers and Electro-Optics/Pacific Rim (CLEO/PR) 2011

Experimental comparison of 980 and 1480 nm pumped erbium-doped fiber amplifiers operating under saturated conditions applicable to long-haul soliton systems

R. G. Smart, J. L. Zyskind, and D. J. DiGiovanni
CTuF5 Conference on Lasers and Electro-Optics (CLEO:S&I) 1993

Tm-doped fiber amplifiers in the 1480nm region with 980nm/1550nm pumps

Edward Zhang, Steve Wilson, Daria Crippa, Rodolfo Di Muro, and Andrew Maroney
OWB2 Optical Amplifiers and Their Applications (OAA) 2001

View More...
Select as filters
Select Topics Cancel
Top
       
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.
Privacy | Terms of Use