The optical element fabrication process

Robert E. Parks

doi:10.1364/OFT.1980.CS2A

Workshop on Optical Fabrication and Testing
Technical Digest Series (Optica Publishing Group, 1980),
paper CS2A
•https://doi.org/10.1364/OFT.1980.CS2A

The optical element fabrication process

Robert E. Parks

Optical Fabrication and Testing 1980

Oakland, California United States
4–6 June 1980
ISBN:

From the session
Common Session (CS2)

Not Accessible

Your library or personal account may give you access

Get PDF
Email
Share
Get Citation
Copy Citation Text
R. E. Parks, "The optical element fabrication process," in Workshop on Optical Fabrication and Testing, Technical Digest Series (Optica Publishing Group, 1980), paper CS2A.

Export Citation
- BibTex
- Endnote (RIS)
- HTML
- Plain Text
Citation alert
Save article

Abstract

The seven steps in the fabrication of a lens are discussed and examples are included to indicate the complexity of some of the steps. The types of tooling required are described as well as the accuracy to which some of the steps can be performed. Emphasis is on the practical aspects of manufacture.

PDF Article

More Like This

Optical Mass Production In A First Generation Manufacturing Base. Potentials and Limitations !

N. A. Platt
FWA4 Optical Fabrication and Testing (OF&T) 1980

Forging An Aspheric Optical Element

R. H. Andersen, F. M. Schmit, and K. M. Leung
TuA5 Optical Fabrication and Testing (OF&T) 1980

Trends in Fabrication Processes for Production Optics

Stephen D. Fantone
TuA3 Optical Fabrication and Testing (OF&T) 1982

Previous Article Next Article