Abstract
Most laser scanning systems for printing applications use motor-driven polygon scanners. Typically, the polygon is a polished metal part approximately 3 to 4 Inches in diameter and one-half inch thick. A common number of sides is eight to sixteen. The majority are manufactured by polishing in stacks.
© 1980 Optical Society of America
PDF ArticleMore Like This
Reflective Replicated Components
Harold M. Weissman
FThC3 Optical Fabrication and Testing (OF&T) 1980
Epoxy Replication of Aspheric Optics*
Harold M. Weissman
TuA6 Optical Fabrication and Testing (OF&T) 1980
History Of Replication
Harro W. D. Wahl
FThC1 Optical Fabrication and Testing (OF&T) 1980