Abstract
In magnetorheological finishing (MRF), an optic is positioned above a reference surface to define a gap. A magnetorheological (MR) fluid, deposited on the reference surface, is carried through the gap. By applying a magnetic field at the gap to substantially stiffen the MR fluid in a localized region, a transient work zone or finishing spot is formed which causes removal of material from the part surface. The finishing spot is smaller than the optic. By controlling dwell time as the part moves relative to the finishing spot, the MRF process achieves surface smoothing, removal of subsurface damage, and figure correction.
© 1996 Optical Society of America
PDF ArticleMore Like This
Don Golini, Steve Jacobs, Yiyang Zhou, Ed Fess, and Mark Atwood
OF98 Extreme Ultraviolet Lithography (EUL) 1996
Don Golini, Paul Dumas, William Kordonski, Stephen Hogan, and Stephen Jacobs
OMD.1 Optical Fabrication and Testing (OF&T) 1998
Don Golini, Yiyang Zhou, Steve Jacobs, Fuqian Yang, Dave Quesnel, Cheryl Gracewski, Mark Atwood, and Ed Fess
JThA.2 Optical Fabrication and Testing (OF&T) 1996