Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • International Optical Design Conference and Optical Fabrication and Testing
  • OSA Technical Digest (CD) (Optica Publishing Group, 2010),
  • paper OTuD1
  • https://doi.org/10.1364/OFT.2010.OTuD1

Comparison of Linear Z-Axis and Rotational B-Axis Freeform Diamond Turning

Not Accessible

Your library or personal account may give you access

Abstract

In a cutting comparison between X-C-Z and X-C-B Slow Tool Servo techniques, the rotational B-axis achieved comparable figure results to the linear Z-axis, but finish suffered due to sub-divisional errors of the B-axis encoder.

© 2010 OSA, SPIE

PDF Article
More Like This
Effects of MSF errors on performance of freeform optics: Comparison of diamond turning and diamond milling

Jason A. Shultz, Matthew A. Davies, and Thomas J. Suleski
FT4B.3 Freeform Optics (Freeform) 2015

Metrology techniques for ultra-precision diamond turned freeform optics

Dali R. Burada, Kamal K. Pant, Vinod Mishra, Ashish Dwivedi, Lalit M. Pant, Gufran S. Khan, and Chandra Shakher
JW2A.4 Freeform Optics (Freeform) 2019

Diamond Turning of Optical Crystals

T. T. Saito, C. K. Syn, B. A. Fuchs, and S. P. Velsko
JTuC2 Optical Fabrication and Testing (OF&T) 1990

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved