Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group
  • Optical Fiber Transmission
  • OSA Technical Digest (Optica Publishing Group, 1975),
  • paper TuA5

Low-Loss, Polymer-Clad Silica Fibers Produced by Laser Drawing

Not Accessible

Your library or personal account may give you access

Abstract

Recently we reported on a new type of low-loss, large-numerical- aperture optical fiber consisting of a pure fused silica core loosely surrounded by an extruded cladding tube of a low-index polymer. Teflon PEP (PEP).1 One of the difficulties encountered in that work was the presence of large diameter variations of the oxy-hydrogen-torch-drawn fibers, which resulted in the coupling of well-guided modes to lossy radiation modes. In order to avoid this difficulty, we used a CO2 laser for the drawing operation which has been demonstrated to produce contamination-free fibers with good diameter control.2

© 1975 Optical Society of America

PDF Article
More Like This
GRADED INDEX CLAD FUSED SILICA CORE FIBER OPTICAL WAVEGUIDES

P. W. Dabby, D. A. Pinnow, and I. Camlibel
PD7 Optical Fiber Transmission (OFTran) 1975

FABRICATION OF GRADED INDEX AND SINGLE MODE FIBERS WITH SILICA CORES

William G. French and G. William Tasker
TuA2 Optical Fiber Transmission (OFTran) 1975

TRANSMISSION CHARACTERISTICS OF LARGE-CORE, LOW-LOSS, SINGLE-MODE FIBERS

L. G. Cohen, P. Kaiser, and H. M. Presby
TuD2 Optical Fiber Transmission (OFTran) 1975

References

You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2022 | Optica Publishing Group. All Rights Reserved