Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Metrologies of LMJ sol-gel anti-reflective coatings in the production line

Not Accessible

Your library or personal account may give you access


In 2012, the production of LMJ sol-gel anti-reflective coatings has started in a dedicated facility. Two coating specifications shall be checked in the production line: the coatings defects and the transmittance on full scale parts. This paper describes the metrology equipments installed in the sol-gel building in order to measure the coatings performances by complying with the rate of production.

© 2013 Optical Society of America

PDF Article
More Like This
Sol-gel coatings ageing in LIL Pockels cells

Eric Lavastre, Cédric Maunier, Gaël Gaborit, Jean-Christophe Poncetta, Christophe Leymarie, Thierry Berthier, Eric Pasini, Pascal Père, Karine Vallé, Laurence Beaurain, Philippe Belleville, and Caroline Gamache
ThD10 Optical Interference Coatings (OIC) 2007

Damage Performance of Sol-gel Anti-Reflective Coatings for the National Ignition Facility

Diana VanBlarcom, Marcus Monticelli, Gabriel Davalos, Phil Miller, David Cross, and C. Wren Carr
WD.10 Optical Interference Coatings (OIC) 2016

Influence of Organic Contamination on Laser Induced Damage of Sol-Gel Anti-Reflection Coated Silica Optics Used in Ambient Environment

Thomas Lanternier, Olivier Favrat, Isabelle Tovena-Pécault, Laurent Lamaignère, Clémence Gingreau, and Jérôme Néauport
ThA.8 Optical Interference Coatings (OIC) 2016

Poster Presentation

Media 1: PDF (425 KB)     
Select as filters

Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All Rights Reserved