Abstract
Low voltage vertical short channel OFET is realized by designing novel device structure without high resolution photolithographic patterning. Soluble pentacene precursor 13,6-N-sulfinylacetamidopentacene based low cost spin coating technique is used to design thin channel OFET using 3M Kapton scotch tape for masking. Device novelty provides fully encapsulated pentacene active layer from environment using sheet type electrodes. High output current of 5mA is achieved under 1volt with channel length of 350nm. AFM scanning shows dendritic pentacene structure growth after annealing at 200°C.
© 2011 Optical Society of America
PDF ArticleMore Like This
Oleg Lupan, Thierry Pauporté, and Bruno Viana
CE2_3 The European Conference on Lasers and Electro-Optics (CLEO/Europe) 2011
Chit Yaw Fu, U. S Dinish, Kiang Wei Kho, Douglas Goh Wenda, and Malini Olivo
80900B European Conference on Biomedical Optics (ECBO) 2011
R. Sai Santosh Kumar, G. Grancini, A. Abrusci, and H. J. Snaith
PThD6 Optical Nanostructures and Advanced Materials for Photovoltaics (SOLED) 2011