Abstract

Surface plasmons have raised much interest over the past few decades in part for their potential in biosensing applications. Waveguide Bragg gratings supporting long-range surface plasmon polaritons, constructed by stepping the width of a metal stripe embedded in Cytop, with an etched microfluidic channel to expose the sensing surface, are proposed as biosensors. Several designs are investigated theoretically to evaluate their bulk and surface sensitivities under wavelength interrogation. Detection limits of $\sim {10}^{-6}\mathrm{RIU}$ and $\sim 8\mathrm{pg}/{\mathrm{mm}}^2$ are predicted for bulk and surface sensing, respectively, with corresponding figures of merit of $\sim 1000{\mathrm{RIU}}^{-1}$ and $\sim 0.2{\mathrm{nm}}^{-1}$. Third-order gratings are good choices because they have essentially the same sensitivity as first-order gratings but over a narrower bandwidth, and they are easier to fabricate due to their larger pitch.

© 2015 Optical Society of America

Long-range surface plasmon Y-junctions for referenced biosensing

Wei Ru Wong, Faisal Rafiq Mahamd Adikan, and Pierre Berini
Opt. Express 23(24) 31098-31108 (2015)

Biosensing using straight long-range surface plasmon waveguides

Oleksiy Krupin, Hamoudi Asiri, Chen Wang, R. Niall Tait, and Pierre Berini
Opt. Express 21(1) 698-709 (2013)

Grating couplers fabricated by e-beam lithography for long-range surface plasmon waveguides embedded in a fluoropolymer

Zohreh Hirboodvash, Maryam Khodami, Norman R. Fong, Ewa Lisicka-Skrzek, Anthony Olivieri, Howard Northfield, R. Niall Tait, and Pierre Berini
Appl. Opt. 58(11) 2994-3002 (2019)

Theoretical performance of Bragg gratings based on long-range surface plasmon-polariton waveguides

Stéphanie Jetté-Charbonneau and Pierre Berini
J. Opt. Soc. Am. A 23(7) 1757-1767 (2006)

Passive long-range surface plasmon-polariton devices in Cytop

Hui Fan, Robin Buckley, and Pierre Berini
Appl. Opt. 51(10) 1459-1467 (2012)