Abstract

In a recent publication [3rd International Conference on Surface Metrology, Annecy, France, 2012, p. 1] it was shown that surface roughness measurements made using a focus variation microscope (FVM) are influenced by surface tilt. The effect appears to be most significant when the surface has microscale roughness ($\mathrm{Ra}\approx 50\mathrm{nm}$) that is sufficient to provide a diffusely scattered signal that is comparable in magnitude to the specular component. This paper explores, from first principles, image formation using the focus variation method. With the assumption of incoherent scattering, it is shown that the process is linear and the 3D point spread characteristics and transfer characteristics of the instrument are well defined. It is argued that for the case of microscale roughness and through the objective illumination, the assumption of incoherence cannot be justified and more rigorous analysis is required. Using a foil model of surface scattering, the images that are recorded by a FVM have been calculated. It is shown that for the case of through-the-objective illumination at small tilt angles, the signal quality is degraded in a systematic manner. This is attributed to the mixing of specular and diffusely reflected components and leads to an asymmetry in the $k$-space representation of the output signals. It is shown that by using extra-aperture illumination or tilt angles greater than the acceptance angle of aperture (such that the specular component is lost), the incoherent assumption can be justified once again. The work highlights the importance of using ring-light illumination and/or polarizing optics, which are often available as options on commercial instruments, as a means to mitigate or prevent these effects.

© 2016 Optical Society of America

Coherence scanning interferometry: linear theory of surface measurement

Jeremy Coupland, Rahul Mandal, Kanik Palodhi, and Richard Leach
Appl. Opt. 52(16) 3662-3670 (2013)

Coherence scanning interferometry: measurement and correction of three-dimensional transfer and point-spread characteristics

Rahul Mandal, Jeremy Coupland, Richard Leach, and Daniel Mansfield
Appl. Opt. 53(8) 1554-1563 (2014)

Surface measuring coherence scanning interferometry beyond the specular reflection limit

Matthew Thomas, Rong Su, Peter de Groot, Jeremy Coupland, and Richard Leach
Opt. Express 29(22) 36121-36131 (2021)

Considerations on the proposed linear theory of surface measurement for coherence scanning interferometers

A. J. Henning and C. L. Giusca
Appl. Opt. 56(10) 2960-2967 (2017)

On tilt and curvature dependent errors and the calibration of coherence scanning interferometry

Rong Su, Yuhang Wang, Jeremy Coupland, and Richard Leach
Opt. Express 25(4) 3297-3310 (2017)