Abstract

Atmospheric wind measurement over complex terrain is of great significance. Due to the limitation of the retrieval method, a single wind lidar cannot be applied to detect the horizontally inhomogeneous wind field. Therefore, a bistatic Doppler wind lidar system is studied for meeting the requirement of wind detection over complex terrain. By analyzing the uncertainty of a synthetic wind field, the isosceles triangle is proven to be the optimal layout of the bistatic lidar system. By using the data set of Nanjing sounding data from 2015 and two typical wind field models, the detection accuracy of the bistatic lidar system is estimated. The experimental results show that the bistatic wind lidar can detect the wind field over complex terrain accurately, the wind errors are less than 1 m/s below 4 km, and the relative errors are less than 5%.

© 2022 Optica Publishing Group

Iodine-filter-based mobile Doppler lidar to make continuous and full-azimuth-scanned wind measurements: data acquisition and analysis system, data retrieval methods, and error analysis

Zhangjun Wang, Zhishen Liu, Liping Liu, Songhua Wu, Bingyi Liu, Zhigang Li, and Xinzhao Chu
Appl. Opt. 49(36) 6960-6978 (2010)

Validation of wind profiles measured with incoherent Doppler lidar

Matthew J. McGill, Wilbert R. Skinner, and Todd D. Irgang
Appl. Opt. 36(9) 1928-1939 (1997)

Continuous-wave bistatic laser Doppler wind sensor

Michael Harris, Graham Constant, and Carol Ward
Appl. Opt. 40(9) 1501-1506 (2001)

Investigation of a field-widened Mach–Zehnder receiver to extend Fe Doppler lidar wind measurements from the thermosphere to the ground

John A. Smith and Xinzhao Chu
Appl. Opt. 55(6) 1366-1380 (2016)

Tristatic high resolution Doppler lidar to study winds and turbulence in the troposphere

V. J. Abreu, T. L. Killeen, and P. B. Hays
Appl. Opt. 20(13) 2196-2202 (1981)