Abstract

In this work, we evaluate the application of microwave-induced plasma optical emission spectrometry (MIP OES) to determine of Al, Cr, Co, Cu, Fe, Mn, Ni and Zn in children’s cough syrup, eye drops, and oral antiseptic using standard dilution analysis (SDA). The SDA method is simple, with only two calibration solutions prepared per sample. The first solution (S1), composed of 50% sample +50% of a standard solution, is introduced into the plasma and the analytical signals are monitored in a time-resolved fashion. Then, the second solution (S2), composed of 50% sample +50% blank, is poured into the vial containing S1. As the solutions mix, the analytical signals gradually drop to a stable baseline. The calibration curve is computed by plotting the ratio of the analyte signal (S_A) over the internal standard signal (which is also part of S1) (S_IS) on the y-axis, versus the inverse of the IS concentration on the x-axis (i.e., S_A/S_IS versus 1/C_IS). In this study, SDA results were compared with values obtained with the traditional methods of external calibration (EC), internal standardization (IS), and standard additions (SA) in MIP OES determinations. The precision (represented as percent RSD) for SDA showed values in the range of 2.50–8.00% for all samples, while conventional calibration methods showed RSDs in the range of 6.40–32.50% for EC, 8.30–21.80% for IS, and 5.20–17.40% for SA. The LODs calculated for SDA are below the maximum limits allowed by the major pharmaceutical regulatory agencies, and presents superior precision and accuracy compared to the traditional calibration methods. Considering its simplicity and efficiency, SDA is an important new tool for accurate analyses of pharmaceuticals.

© 2017 The Author(s)

Optical emission spectrometry and laser-induced fluorescence of laser produced sample plumes

Kay Niemax and Wolfgang Sdorra
Appl. Opt. 29(33) 5000-5006 (1990)

Detection of micro-toxic elements in commercial coffee brands using optimized dual-pulsed laser-induced spectral analysis spectrometry

Ahmed Asaad I. Khalil and Osama A. Labib
Appl. Opt. 57(23) 6729-6741 (2018)

Determination of elemental impurities in plastic calibration standards using laser-induced breakdown spectroscopy

Krishna K. Ayyalasomayajula, Dustin L. McIntyre, Jinesh Jain, Jagdish P. Singh, and Fang Yu-Yueh
Appl. Opt. 51(7) B143-B148 (2012)

Practical and highly sensitive elemental analysis for aqueous samples containing metal impurities employing electrodeposition on indium-tin oxide film samples and laser-induced shock wave plasma in low-pressure helium gas

Koo Hendrik Kurniawan, Marincan Pardede, Rinda Hedwig, Syahrun Nur Abdulmadjid, Kurnia Lahna, Nasrullah Idris, Eric Jobiliong, Hery Suyanto, Maria Margaretha Suliyanti, May On Tjia, Tjung Jie Lie, Zener Sukra Lie, Davy Putra Kurniawan, and Kiichiro Kagawa
Appl. Opt. 54(25) 7592-7597 (2015)

Quantitative analysis of Fuller’s earth using laser-induced breakdown spectroscopy and inductively coupled plasma/optical emission spectroscopy

I. Rehan, M. Z. Khan, K. Rehan, S. Sultana, M. U. Rehman, R. Muhammad, M. Ikram, and H. Anwar
Appl. Opt. 58(16) 4227-4233 (2019)