Abstract
In the previous paper [J. Opt. Soc. Am. A 28, 126 (2011)], an analytical formula was presented for calculating radiative fluxes from arbitrarily distributed and arbitrarily radiating multiple-point emitters of bioluminescent or chemiluminescent sources within cylindrical reactors, when the radiation from these point emitters propagates through two homogeneous isotropic media and reaches a planar-circular coaxial detector. This formula was based on two assumptions. The first is that radiation passes across a planar boundary interface between the two media. The second is that the surface reflections on the lateral surface and on the reactor base opposite the detector may be neglected. In this paper, the formula obtained previously was simplified for the case of uniformly distributed point emitters of bioluminescent or chemiluminescent sources emitting an identical rotationally symmetric radiation. The simplified formula is suitable for optimizing and calibrating the analyzed reactor–detector sys tem, which is most commonly used to study the bioluminescence emitted by small biological objects and the chemiluminescence from chemical reactions. Representative data were calculated, illustrated graphically, and tabulated.
© 2011 Optical Society of America
Full Article | PDF ArticleMore Like This
Stanislaw Tryka
J. Opt. Soc. Am. A 28(2) 126-135 (2011)
Stanislaw Tryka
Opt. Express 15(7) 3777-3790 (2007)
Stanislaw Tryka
J. Opt. Soc. Am. A 18(8) 1934-1943 (2001)