Abstract
We tested the ability of normal-incidence, multilayer-coated x-ray optics to produce diffraction-limited images. The imaging performance at 14 nm of a spherical mirror substrate coated with a single metal layer was compared with that of the same substrate coated with a Mo–Si multilayer. A knife-edge test was used to quantify the image aberrations. The knife-edge data were fitted with a model based on Fresnel diffraction theory. We found that the multilayer coating introduced a measurable but small figure error into the optic; the change in figure was less than λ/16 peak to valley. We conclude that a properly deposited multilayer coating will not degrade the imaging performance of an optical system designed to operate at the diffraction limit.
© 1991 Optical Society of America
Full Article | PDF ArticleMore Like This
S. Marchesini, H. N. Chapman, S. P. Hau-Riege, R. A. London, A. Szoke, H. He, M. R. Howells, H. Padmore, R. Rosen, J. C. H. Spence, and U. Weierstall
Opt. Express 11(19) 2344-2353 (2003)
Brandon D. Chalifoux, Ralf K. Heilmann, Herman L. Marshall, and Mark L. Schattenburg
Appl. Opt. 59(16) 4901-4914 (2020)
D. A. Tichenor, G. D. Kubiak, M. E. Malinowski, R. H. Stulen, S. J. Haney, K. W. Berger, L. A. Brown, R. R. Freeman, W. M. Mansfield, O. R. Wood, D. M. Tennant, J. E. Bjorkholm, A. A. MacDowell, J. Bokor, T. E. Jewell, D. L. White, D. L. Windt, and W. K. Waskiewicz
Opt. Lett. 16(20) 1557-1559 (1991)