Abstract
We demonstrate the use of photoinduced fluidity in low-loss chalcogenide fibers for producing tapers with fine control of the diameter and geometry. The tapers produced this way act as sensing zones along chalcogenide glass fibers used for evanescent wave spectroscopy. The optical microfabrication method consists in irradiating the chalcogenide fiber with sub-bandgap laser light under a tensile stress. The resulting athermal photoinduced fluidity permits to produce tapers with good control over the geometry without altering the optical properties of the fiber. Gains in detection sensitivity greater than 1 order of magnitude are measured using these tapers.
© 2010 Optical Society of America
Full Article | PDF ArticleMore Like This
Quentin Coulombier, Laurent Brilland, Patrick Houizot, Thierry Chartier, Thanh Nam N’Guyen, Frédéric Smektala, Gilles Renversez, Achille Monteville, David Méchin, Thierry Pain, Hervé Orain, Jean-Christophe Sangleboeuf, and Johann Trolès
Opt. Express 18(9) 9107-9112 (2010)
M. El-Amraoui, J. Fatome, J. C. Jules, B. Kibler, G. Gadret, C. Fortier, F. Smektala, I. Skripatchev, C.F. Polacchini, Y. Messaddeq, J. Troles, L. Brilland, M. Szpulak, and G. Renversez
Opt. Express 18(5) 4547-4556 (2010)
Ozan Aktaş and Mehmet Bayındır
Appl. Opt. 56(3) 385-390 (2017)