Abstract
In optical coherence tomography, axial and lateral resolutions are determined by the source coherence length and the numerical aperture of the sampling lens, respectively. Whereas axial resolution can be improved by use of a broadband light source, there is a trade-off between lateral resolution and focusing depth when conventional optical elements are used. We report on the incorporation of an axicon lens into the sample arm of an interferometer to overcome this limitation. Using an axicon lens with a top angle of 160°, we maintained or better lateral resolution over a focusing depth of at least 6 mm. In addition to having high lateral resolution, the focusing spot has an intensity that is approximately constant over a greater depth range than when a conventional lens is used.
© 2002 Optical Society of America
Full Article | PDF ArticleMore Like This
B. Povazay, K. Bizheva, A. Unterhuber, B. Hermann, H. Sattmann, A. F. Fercher, W. Drexler, A. Apolonski, W. J. Wadsworth, J. C. Knight, P. St. J. Russell, M. Vetterlein, and E. Scherzer
Opt. Lett. 27(20) 1800-1802 (2002)
L. Vabre, A. Dubois, and A. C. Boccara
Opt. Lett. 27(7) 530-532 (2002)
Mark C. Pierce, B. Hyle Park, Barry Cense, and Johannes F. de Boer
Opt. Lett. 27(17) 1534-1536 (2002)