Expand this Topic clickable element to expand a topic
Skip to content
Optica Publishing Group

Temperature-insensitive polarimetric vibration sensor

Not Accessible

Your library or personal account may give you access

Abstract

Vibration measurement is a frequent measurement requirement in a number of areas. Optical vibration sensors have many advantages over electrical counterparts. A common approach is to optically detect the vibration induced mechanical movement of a cantilever. Nevertheless, their practical applications are hindered by the cross-sensitivity of temperature and dynamic instability of the mechanical structure, which lead to unreliable vibration measurements. Here, we demonstrate a temperature insensitive vibration sensor that involves an enclosed suspended cantilever integrated with a readout fiber, providing in-line measurement of vibration. The cantilever is fabricated from a highly birefringent photonic crystal fiber by chemical etching and fused to a single-polarization fiber. Mechanical vibration induced periodic bending of the cantilever can significantly modify the state of polarization of the light that propagates along the photonic crystal fiber. The single-polarization fiber finally converts the state of polarization fluctuation into the change of output optical power. Therefore, the vibration could be demodulated by monitoring the output power of the proposed structure. Due to the special design of the structure, the polarization fluctuation induced by a variation of the ambient temperature can be significantly suppressed. The sensor has a linear response over the frequency range of 5 Hz to 5 kHz with a maximum signal-to-noise ratio of 60 dB and is nearly temperature independent.

© 2022 Optica Publishing Group

Full Article  |  PDF Article
More Like This
Temperature-insensitive polarimetric vibration sensor based on HiBi microstructured optical fiber

Karima Chah, Nicolas Linze, Christophe Caucheteur, Patrice Mégret, Pierre Tihon, Olivier Verlinden, Sanne Sulejmani, Thomas Geernaert, Francis Berghmans, Hugo Thienpont, and Marc Wuilpart
Appl. Opt. 51(25) 6130-6138 (2012)

Vibration-insensitive polarimetric fiber optic current sensor based on orbital angular momentum modes in an air-core optical fiber

Lina Xiang, Fufei Pang, Zhongyin Xiao, Liang Zhang, Heming Wei, Mengshi Zhu, Siddharth Ramachandran, and Tingyun Wang
Opt. Lett. 49(7) 1753-1756 (2024)

Temperature-insensitive optical sensors based on two cascaded identical microring resonators

Guoshuai Su, Mingyu Li, Zhiping Yang, Jiayi Xie, Yuxia Song, and Jian-Jun He
Opt. Lett. 47(17) 4327-4330 (2022)

Data availability

The data that support the findings of this Letter are available from the corresponding author upon reasonable request.

Cited By

You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Figures (5)

You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Equations (6)

You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an Optica member, or as an authorized user of your institution.

Contact your librarian or system administrator
or
Login to access Optica Member Subscription

Select as filters


Select Topics Cancel
© Copyright 2024 | Optica Publishing Group. All rights reserved, including rights for text and data mining and training of artificial technologies or similar technologies.