Abstract

White-light scanning interferometry is increasingly used for precision profile metrology of engineering surfaces, but its current applications are limited primarily to opaque surfaces with relatively simple optical reflection behavior. A new attempt is made to extend the interferometric method to the thickness-profile measurement of transparent thin-film layers. An extensive frequency-domain analysis of multiple reflection is performed to allow both the top and the bottom interfaces of a thin-film layer to be measured independently at the same time by the nonlinear least-squares technique. This rigorous approach provides not only point-by-point thickness probing but also complete volumetric film profiles digitized in three dimensions.

© 1999 Optical Society of America

Sensitivity analysis of thin-film thickness measurement by vertical scanning white-light interferometry

Jing-tao Dong and Rong-sheng Lu
Appl. Opt. 51(23) 5668-5675 (2012)

Scanning white-light interferometer for measurement of the thickness of a transparent oil film on water

Changsen Sun, Longcheng Yu, Yuxing Sun, and Qingxu Yu
Appl. Opt. 44(25) 5202-5205 (2005)

Application of white-light scanning interferometer on transparent thin-film measurement

Meng-Chi Li, Der-Shen Wan, and Cheng-Chung Lee
Appl. Opt. 51(36) 8579-8586 (2012)

Spectrally resolved white-light phase-shifting interference microscopy for thickness-profile measurements of transparent thin film layers on patterned substrates

Sanjit K. Debnath, Mahendra P. Kothiyal, Joanna Schmit, and Parameswaran Hariharan
Opt. Express 14(11) 4662-4667 (2006)

Thin-film thickness profile and its refractive index measurements by dispersive white-light interferometry

Young-Sik Ghim and Seung-Woo Kim
Opt. Express 14(24) 11885-11891 (2006)