Abstract

We present a simple and versatile approach for fabricating terahertz lenses based on compression molding of micropowder polymer materials in a tabletop hydraulic press. To demonstrate the feasibility of this approach, a biconvex lens shape is calculated using a ray-tracing algorithm and lenses based on two different micropowders are fabricated. As the powder materials have different refractive indices, the resulting lenses share the same geometric shape but differ in their respective focal length. The focusing properties of the lenses are evaluated by transversal and sagittal beam profile measurements in a fiber-coupled terahertz time-domain spectroscopy system, confirming the excellent imaging qualities of the compression molded lenses.

© 2011 Optical Society of America

Terahertz plastic compound lenses

M. Wichmann, A. S. Mondol, N. Kocic, S. Lippert, T. Probst, M. Schwerdtfeger, S. Schumann, T. Hochrein, P. Heidemeyer, M. Bastian, G. Bastian, and M. Koch
Appl. Opt. 52(18) 4186-4191 (2013)

Analysis of optical properties in injection-molded and compression-molded optical lenses

Chung Yen Wang and Pei Jen Wang
Appl. Opt. 53(11) 2523-2531 (2014)

Terahertz lens made out of natural stone

Daehoon Han, Kanghee Lee, Jongseok Lim, Sei Sun Hong, Young Kie Kim, and Jaewook Ahn
Appl. Opt. 52(36) 8670-8675 (2013)

Fabrication of concave and convex potassium bromide lens arrays by compression molding

Florence de la Barrière, Guillaume Druart, Nicolas Guèrineau, Jean Taboury, Alain Gueugnot, and Vincent Huc
Appl. Opt. 51(21) 4936-4944 (2012)

Precision compression molding of glass microlenses and microlens arrays—an experimental study

G. C. Firestone and A. Y. Yi
Appl. Opt. 44(29) 6115-6122 (2005)