Abstract

We present what is to our knowledge the first comprehensive investigation of the use of blazed fiber Bragg gratings (BFBGs) to interrogate wavelength division multiplexed (WDM) in-fiber optical sensor arrays. We show that the light outcoupled from the core of these BFBGs is radiated with sufficient optical power that it may be detected with a low-cost charge-coupled device (CCD) array. We present thorough system performance analysis that shows sufficient spectral–spatial resolution to decode sensors with a WDM separation of 75 ρm, signal-to-noise ratio greater than 45-dB bandwidth of 70 nm, and drift of only 0.1 ρm. We show the system to be polarization-state insensitive, making the BFBG–CCD spectral analysis technique a practical, extremely low-cost, alternative to traditional tunable filter approaches.

© 2004 Optical Society of America

Fiber grating sensing interrogation based on an InGaAs photodiode linear array

Guoyu Li, Tuan Guo, Hao Zhang, Hongwei Gao, Jian Zhang, Bo Liu, Shuzhong Yuan, Guiyun Kai, and Xiaoyi Dong
Appl. Opt. 46(3) 283-286 (2007)

Interrogating fiber Bragg grating sensors by thermally scanning a demultiplexer based on arrayed waveguide gratings

G. Z. Xiao, P. Zhao, F. G. Sun, Z. G. Lu, Zhiyi Zhang, and C. P. Grover
Opt. Lett. 29(19) 2222-2224 (2004)

Interrogation unit for fiber Bragg grating sensors that uses a slanted fiber grating

César Jáuregui, Antonio Quintela, and José Miguel López-Higuera
Opt. Lett. 29(7) 676-678 (2004)

Arrayed waveguide grating interrogator for fiber Bragg grating sensors: measurement and simulation

Jan Koch, Martin Angelmahr, and Wolfgang Schade
Appl. Opt. 51(31) 7718-7723 (2012)

Interrogation of interferometric sensors with a tilted fiber Bragg grating

César Jáuregui, José Miguel López-Higuera, and Antonio Quintela
Opt. Express 12(23) 5646-5654 (2004)