Abstract

Low-Fresnel number optical systems exhibit significant diffraction effects that cause a shift in the peaks of on-axis irradiance away from the geometric focal point. This is currently interpreted as a change of the focal length of an optical system, leading optical system designers to compensate for the effect by assuming the image plane is coincident with the peak of on-axis irradiance. While this may be an appropriate interpretation for certain applications, I show that despite the shift in peak irradiance away from the geometrical focal point, a change in a system’s optical power will not increase the on-axis irradiance at that distance. This is important for low-light level applications where it is necessary to mitigate diffraction induced transmission losses. I also show that low-Fresnel number systems have increased tolerance on system power at the geometrical focal point and as a result are inherently achromatic.

© 2009 Optical Society of America

Gaussian imaging transformation for the paraxial Debye formulation of the focal region in a low-Fresnel-number optical system

Carlos J. Zapata-Rodrı́guez, Pedro Andrés, Manuel Martı́nez-Corral, and Laura Muñoz-Escrivá
J. Opt. Soc. Am. A 17(7) 1185-1191 (2000)

Imaging in optical systems of finite Fresnel number

C. J. R. Sheppard
J. Opt. Soc. Am. A 3(9) 1428-1432 (1986)

Relaxed fabrication tolerances for low-Fresnel-number lenses

Thomas Hessler and Rino E. Kunz
J. Opt. Soc. Am. A 14(7) 1599-1606 (1997)

Focal shift and concept of effective Fresnel number for a Gaussian laser beam

William H. Carter
Appl. Opt. 21(11) 1989-1994 (1982)

Focal shift in small-Fresnel-number focusing systems of different relative aperture

Yajun Li
J. Opt. Soc. Am. A 20(2) 234-239 (2003)