Add to BibSonomy
Abstract
The impact of thermal lensing (TL) on the transverse mode instability (TMI) threshold power in rod-type fiber amplifiers is investigated. Simulations are conducted with a 3D coupled mode analysis on a set of five scaled large pitch fiber (LPF) amplifiers. The LPF fibers are represented by surrogate step-index fibers (SIFs) with scaled cladding diameters, core diameters, and numerical apertures for a fixed normalized frequency V equal to 3.0 and scaled modal field overlap integrals with the core and cladding. It is found that thermal lensing decreases the TMI threshold powers due to increases in the TMI nonlinear gain. This gain increase is attributed to an increase in the nonlinear gain overlap integrals that occurs with the reduction in the fundamental mode effective area. Estimates for the TMI threshold power are in good agreement with measurements; however, the simulations overestimate the mode shrinkage factor. This discrepancy is tentatively attributed to the representation of the LPF by an effective SIF. These results may offer opportunities for fiber designs that increase the TMI threshold powers.
© 2024 Optica Publishing Group
Full Article | PDF ArticleMore Like This
Marc D. Mermelstein
Appl. Opt. 61(3) 751-758 (2022)
Michalis N. Zervas
Opt. Express 27(13) 19019-19041 (2019)
Marc D. Mermelstein
Appl. Opt. 60(16) 4901-4915 (2021)