Abstract

An approximate expression for the output beam from a confocal resonator, into which a pinhole for mode selection is inserted at an arbitrary position near the mirror at one end, is studied experimentally. The output beam consists of the fundamental component, in which the diffraction from the pinhole edge is not considered, and a field of the higher order component including the diffraction. In the region of the pinhole aperture larger than the beam width of the confocal resonator before the insertion of the pinhole, the diffraction component can be neglected. The output beam then may be approximated by the beam of the fundamental component, which is expressed simply by the field of the confocal resonator with unequal-sized mirrors of Boyd and Kogelnik. These results are confirmed by both experimental and theoretical examinations.

© 1972 Optical Society of America

Mode Selectivity and Mirror Misalignment Effects in Unstable Laser Resonators

Arthur N. Chester
Appl. Opt. 11(11) 2584-2590 (1972)

Degenerated confocal resonator

Norman Hodgson, Bernd Ozygus, Frank Schabert, and Horst Weber
Appl. Opt. 32(18) 3190-3200 (1993)

Output characteristics of an unstable confocal resonator

Zuhai Cheng, Xuhui He, and Zaiguang Li
Appl. Opt. 24(23) 4260-4264 (1985)

Optical Resonator Using Anisotropic Metal Film for Mode Selection

N. D. Goldina, M. I. Zakharov, and Yu. V. Troitsky
Appl. Opt. 11(2) 261-264 (1972)

Optical Resonators with Paraxial Modes

Ernest E. Bergmann
Appl. Opt. 11(1) 113-119 (1972)