Abstract
A high quality nonimpact printer at a speed of 10,000 1/min is realized by a new laser scanning system and an electrophotographic process. The laser scanning system uses a parabolic mirror for correcting line scanning distortion. When a polygonal mirror facet is placed on the axis of the parabolic mirror at about two-thirds of the focal length from the mirror surface, and the focus of the parabolic mirror is on a photosensitive drum surface. The scanning velocity distortion is reduced to less than 0.1% over ±30° of the scanning angle. The confusion circle induced by the parabolic mirror is 1 order of magnitude smaller than the spot size determined by diffraction limit. The tolerance of the length from the rotating mirror to the parabolic mirror for 0.1% distortion over ±30° scanning angle is 10% of focal length. This high speed laser printer has demonstrated the high quality printing of 10-dots/mm resolution.
© 1978 Optical Society of America
Full Article | PDF ArticleMore Like This
Akira Arimoto, Susumu Saitoh, Takeshi Mochizuki, Yasuo Kikuchi, and Kikuo Hatazawa
Appl. Opt. 26(13) 2554-2557 (1987)
Keiji Kataoka, Yasuyuki Shibayama, Masazumi Ohuchi, and Shuho Yokokawa
Appl. Opt. 36(25) 6294-6307 (1997)
K. Klose
Appl. Opt. 17(2) 203-210 (1978)