Abstract

The coupling from a laser to a thin-film optical waveguide by a prism coupler composed of a birefringent material can be strongly dependent on the orientation of the optic axis. It is shown that when the effective index of the wave guided by the film lies between the ordinary and extraordinary refractive indices of the prism, the coupling depends strongly on the orientation of the optic axis. Differences in orientation of only a few degrees separate ranges of orientation in which strong coupling occurs from ranges in which there is no coupling. The orientation dependence of the coupling is considered both for the pure mode case wherein the optic axis lies in the plane of incidence and for the case when the optic axis is rotated out of the plane of incidence, so that mode coupling occurs. When the effective refractive index of the guided wave is less than both the ordinary and extraordinary refractive indices of the prism, the coupling properties are found to be similar to those obtained with an isotropic prism.

© 1978 Optical Society of America

Measurement of Thin Film Parameters with a Prism Coupler

R. Ulrich and R. Torge
Appl. Opt. 12(12) 2901-2908 (1973)

Birefringence measurements of thin dielectric films by the prism coupler method

Gervais Leclerc and Arthur Yelon
Appl. Opt. 23(16) 2760-2762 (1984)

Birefringent Coupler for Integrated Optics

Gerald B. Brandt
Appl. Opt. 13(6) 1359-1362 (1974)

A Birefringent Prism Coupler in Guided Wave Experiments

Haiming Wang
Appl. Opt. 34(34) 8081-8081 (1995)

Theory of Prism–Film Coupler and Thin-Film Light Guides

P. K. Tien and R. Ulrich
J. Opt. Soc. Am. 60(10) 1325-1337 (1970)